Product detail
Type 1: Quick Release Fenders
Front fork diameter: about 19-36mm
Seatpost diameter: about 26-30mm
Weight: about 234g (only the net weight of the fender)
Material: pp material
Warranty: 1 year
Type 2: Bicycle Fender 24 Inch
Front fork diameter: about 18-24mm
Weight: about 157g (only the net weight of the fender)
Material: pp material
Warranty: 1 year
Product feature
Widen and enlarge
Various angle adjustment
Not easy to deform
Fits the shape of the wheel
Waterproof and antifouling
Easy to clean
Large area fendersv
Not easy to deform, quick installation, free adjustment
Product information
Widen and enlarge
Various angle adjustment Only the quick release version has two adjustment knobs
Using pp material Not easy to break
Fits the shape of the wheel Repel water and dirt without hindering riding
Waterproof and antifouling easy to clean
Quick release design Quick release knob, no tedious steps (quick release only)
Accessories list
Expansion plug 24-inch fenders are suitable for fork holes with an inner diameter of 18-24mm
The quick release version is suitable for fork holes with an inner diameter of 19-36mm
Quick Release - Front Fender Installation Steps 1. Install long screws and washers
2. Install a suitable expansion plug according to the diameter of the front fork
3. Install the expansion plug into the front fork hole
4. Tighten the screws, expand the expansion plug, clamp the front plug, and the installation is complete
Quick Release - Rear Fender Installation Steps 1. Install the limit accessories
2. Tighten the screw with an Allen tool
3. Align the quick release connector with the seat post
4. After tightening the quick release screws, the clamping installation is completed
24 inch model - front fender installation steps 1. Link the front fender connecting piece with the expansion plug
2. Install the gasket
3. Install the expansion plug into the front fork hole and tighten the screw
4. Connect the front fender and the insert to complete the installation
24 inch model - rear fender installation steps 1. Put the washer on the seatpost
2. Connect the connecting seat to the seat post
3. Tighten the screws
4. Installation is complete
