PCI-E 4.0 4x4 to M.2 4-Bays Expansion Card for M.2 NVMe Solid State Drive 2242 2260 2280 SSD PCIe X16 4.0 Gen 4 Adapter Card

Note:

1.Before purchase, pls make sure your motherboard supports setting the PCIe working mode to X4X4X4X4.

Otherwise the SSD won't be recognized.

2. This item does not boot the system.

3. This first SSD slot is the basic location, which must be used. If you use only one SSD, you must insert it in the first slot.

Feature:

1, PCIE X16 full bandwidth 4.0, GEN4 protocol, compatible with gen3\gen4.

2. Conditions of use: The PCIE slot corresponding to the motherboard supports BIOS settings, and the PCIE working mode is set to X4X4X4X4.

3. Support 4-bay PCIE3.0\PCIE4.0 nvme solid state drive.

4, Support with M. 2 to PCIE adapter cable, which can be converted into 4 graphics cards.

5, Gold finger immersion gold process, increase the gold thickness to 5U.

6, 4xlotes M. 2 slots, large area hollow for heat dissipation.

7, 2x decompression regulator IC, using high-current inductors and adding solid capacitors.

8, CLK clock split IC, 1 point 4 channels.

9. Each disk has an independent LED power-on indicator and work indicator, and a key switch LED setting.

10, Four-layer high-density low-impedance circuit board, standard full-height side baffle, excellent quality.

11. PCIe 4. 0 4x4 to M. 2 NVMe four-bay expansion card.

12. It is suitable for 1 to 4xM. 2 NVMe SSD memory card transfer to PCIe x16 interface expansion.

13. Support PCI Express4.0x4x4x4x4, support 4 M.2 NVMe full-speed slots.