ZTTO Hydraulic Disc Brake Hose Connector Insert And Olive Sets

Material:
Connector Insert And Olive: Copper
Bolt: Steel
Bolts Cap: Plastic

Installation Notes:

Installing the hydraulic disc brake hose connector insert and olive sets is a straightforward process that can be completed with basic tools. Here are some general installation notes to keep in mind:

Ensure that the brake hose is clean and free of debris before installing the inserts and olives.

1.Use a sharp, clean cutting tool to cut the brake hose to the correct length.
2.Place the insert into the end of the brake hose and push it in until it is fully seated.
3.Slide the olive onto the end of the brake hose, making sure it is seated against the insert.
4.Use a torque wrench to tighten the connector onto the brake caliper or lever to the manufacturer's recommended torque specification.

good compatibility

Made from high-quality materials, these inserts and olives are designed to withstand the high pressures and temperatures generated by hydraulic brakes. They are compatible with most hydraulic disc brake systems and can be used with various types of brake hoses.

Proper usage of the hydraulic disc brake hose connector insert and olive sets is crucial for maintaining the safety and performance of your hydraulic disc brake system. Here are some general usage notes to keep in mind:

1.Inspect the brake system regularly for signs of wear or damage, including the inserts and olives.
2.If the brake hose is damaged or worn, replace it immediately.
3.Do not reuse inserts or olives that have been previously installed.
4.Use only the recommended torque specification when tightening the connector onto the brake caliper or lever.
5.Follow the manufacturer's instructions for bleeding the brake system after installation or maintenance.