MYPIN

MYPIN ELECTRICAL CO.,LTD

Add:No7,Lane 5,Str Anhe,Fengyu road ,Zhongshan ,Guangdong ,China

Whatsapp/wechat:18676133547

Products description

1.Products display

2.Technical specification

Model:LM8-RRD

Mypin LM series 4 LED digital display Loadcells indicator

• Input:1-4 loadcells

• Output:2 relay

• Analog output:4-20mA

• Size :48*96*80mm

• Accuracy :0.1%F.S±2digit

• Sampling speed:≤16times/sec
• Weight:0.35Kg

3.Operation/Parameter setting

• press and hold SETkey until to enter setting menu.
• Press＜＜ /Rst key once, LED flashing
• Press ＜＜ /Rst to shift LED if need
• Press Up or Down key to modify data,
• Press SET key to confirm data.
• Press SET key to read other parameters, and repeat B,C,D steps to modify data if need
• Press and hold SET key until to quit menu

4.Weight Adjustment:

• When empty (no load),press DOWN key until ‘Oy’ flashing. release DOWN key ; PV LED displays about 0
• Follow step 1,placing the weight of this calibration, press UP key until SV LED flashing.
• Release UP key.refer parameter setting step to set SV LED data,SV LED data = the weight of this calibration (Equal USP parameter),
• E.g,the calibrate weight is 50Kg, Setting SV data=50.00, the unit is Kg, Setting SV data=0.050, the unit is Ton
• Refer Page 2(Manual)to lock adjust operation If need

5.Clear tare weight :

• E.g when no load,PV display range: -0.2--+0.2, set PF2=0.3 > |PV|=0.2, PV will display 0.0,
• But if PV > PF2, E.g PV value =0.31> 0.2, PV LED will normal display 0.31.

7.Series Introduction

• 1 Weight measurement and control *Mixed Batching control
• Direct Load :1-4 PCS loadcells, 24 Bits A / D
• Digital Input: Start / Stop and Clear Tare
• Output::4-20mA / 0-10V , Relay / SSR / Logic output
• Data Peak value holding function for choice.
• Communication : RS485 RS232,RJ45(LAN) MODBUS-RTU protocol.
•  
  

*(The above description is the full range of functions included in the TA series.

If required, please select the appropriate model to prevent the function from being unavailable.)