Features:

* 4-core dsp chip processor with stage-level music, vocal and reverberation adjustment capabilities.

* 199 sets of sound memory can be switched freely, and the professional tuner can help you adjust the mode.

* 99 groups of preset programs. The device that separates the audio signal is located before the power amplifier. After frequency division, the independent power amplifier is used to amplify the signals of each audio frequency band, and then send them to the corresponding speaker units. A low power consumption electronic active filter is realized, the adjustment is easier, and the power loss is small and reduced.



Specification:

Name: Audio Processor

Frequency response: 20Hz-20KHz + 1/-3dB

Dynamic range: >90dB

Harmonic distortion: @0dbv@0.02%@1KHz

A/DD/A conversion: conversion plan - 18 bits

Processor speed: 30,000 instructions per second

Processor memory: 6K x 16 bits

Sampling frequency: 46.875KHz

Input: Channel 2, nominal level +4dbv, maximum level +20dbv, impedance 1m, stereo for each channel

Output: dual channel-2, matrix stereo digital, maximum level +14dbv (effect),+20dbv (direct),impedance 220Ω

Power supply: 9V/5A

Size: 485*85*45mm

Colour: Black



Packing included: 

1 * Audio Processor



Note:

1. Due to manual measurements and slight color variations, please allow 1-3 cm (0.4-1.18 inches) difference to suit different display settings.

2. Due to the light and screen difference, the item's color may be slightly different from the pictures. Please understand.