FCS 966 Opal Graphic Equaliser EQ Constant Q Dual Equalizer 31 band

EQ Stereo Graphic EQ high end audio system

Constant Q Filters
The modern generation of graphic EQs uses the Constant Q topology, pioneered by Leicozic Audio, which means that the filter width is constant whatever the fader gain setting.

Compared to the earlier 'gyrator' style of filters, Constant Q filters provide a smoother and more predictable interaction between adjacent faders and the resulting EQ curve more closely resembles the actual fader positions.

More Gain Control Per Filter
Each EQ fader has +/-15dB of adjustable gain, more than many competitive graphic EQs. The faders are long-throw 45mm types for precision control.

High-Pass Filter
Also provided on the FCS-966 is a sweepable high-pass filter which can be used very effectively to restrict the low-energy output for better amplifier and loudspeaker performance. Stage monitors also benefit from the application of a high-pass filter to remove bass signals (e.g. from vocal-only wedges).

Metering
Leicozic Audio believes in providing engineers with information, and the FCS-966's 8-segment LED meter shows output level and warns of signal clipping within the EQ. When the unit is switched to bypass, the meter will read the input level, allowing accurate matching of the 'dry' and equalized signals using the gain control.

Center Bypass
When any EQ fader is in it's center detent position the filter is automatically bypassed for optimum performance.

Input/Outputs
All the inputs and outputs of the FCS-966 are electronically balanced, with optional transformer balancing. To make installation of the FCS-966 easier, there are three different interface connectors: XLR-type, 1/4" TRS jack and Phoenix/Combicon screw terminals.

Relay Bypass
The EQ IN buttons switch the EQ path into circuit. When switched out, or power fails, a high-quality relay switches the input signal directly to the output connectors.

Control Descriptions

* Faders - 30 EQ filter faders on ISO centres, each with nominal +/-15dB of gain. Positive center detent on 45mm long-throw precision faders 
* HP Filter - Sweepable high pass filter, frequency adjustable from OUT (flat) up to 250Hz

* LF Contour - Smooth shelving filter, +/-6dB of gain at 50Hz 

* HF Contour - Smooth shelving filter, +/-6dB of gain at 14kHz 

* GAIN - Used for overall unity gain adjustment. Adjustable from - infinity to +10dB 

* CLIP - Triple-point clip detector that indicates red when the internal signal is clipping at any one of three critical points 
* LED Meter - Shows output signal level (input signal when EQ is bypassed) from -24dBu to +18dBu in 8 steps

Audio FCS-966 Graphic Equalizer Specifications:

HP filter set to OUT. GAIN, HF, LF & all faders set to 0

Input Section 

Input Impedance: 10kOhm, electronically balanced 

Maximum Imput Level : >+20dBu 
CMRR: >-40dB @1kHz

Output section 

Output Impedance: < 50 Ohms, electronically balanced 
Maximum Output Level: >+20dBu into 600 Ohms

Filters 

HP filter control: OUT to 250Hz @ 12dB/octave 

LF contour: +/-6dB shelving @ 50Hz 6dB/octave 

HF contour: +/-6dB shelving @ 14kHz 6db/octave 
FREQUENCY bands: +/-15dB on ISO centres with a Q of 4

General Performance 

Frequency Response: 5Hz to 45kHz +/-1dB 

Noise: <-94dBu 22Hz to 22kHz 

Dynamic Range: > 115dB 

Cross Talk: >-80dB @1kHz 

Distortion: <0.005%THD (80kHz measurement 

BW) 20Hz-20kHz. 

GAIN control: +10dB to -infinity 

Dimensions: 19" x 5.25" x 7.1" (483mm x 134mm x 180mm) 

Weight: 6.6lbs (3kgs),unpacked 
AC Power: 115/230V AC, 50/60Hz, 30VA.