Features 1: 1. Standard 1U thin and light can be mounted on the rack 2. Dual-channel synchronous control 31-segment DSP processing equalizer 3. Each segment has LED spectrum indicator, real-time 3-1-segment point-like absolute accuracy 99% 4. With cutting-edge Noise gate noise reduction function 5. Input and output interface supports multiple types: TRS6.35/RCA lotus/XLR card with CANON balanced interface 6. EQ bypass: bypass the graphic equalizer in the signal path Call function, can save and call a variety of modes.8. USB interface can input computer control point output.
Features 2: 1, SAVE key: operate and press once to enter the SAVZ storage state. There are 1-16 memory selection function keys to switch the display content, 1-16 kinds of memory confirmation, long press the SAVZ key to enter the RELOAD MODE mode, long press to confirm the reset Operation. 2. BECALL key operation Short press to enter the RECALL FROM recall mode, select the function key to recall 1-16 memory storage modes as the current mode, long press the RECALL key to adjust the EQ parameter state for mixing, long press to exit the state. 3 .EQ/BYPASSI key: Press once to enter E0 parameter value adjustment content state selection function key to enter EQ parameter value 20Hz-20KHz, content adjustment, content included range (EQ FRE. Frequency value 20Hz-20KHz) is 3-segment 1-segment value to confirm the adjustment , CAIN is the frequency gain adjustment of each section. DELAY is the time delay adjustment of the output channel. VOL OUT is the volume value adjustment of the output channel. HIGH PASS is the high pass filter (20Hz -50Hz range). LOW PASS is the low channel filter (5KHz)-20KHz range) long press EQ/BYPASSI to (PASS) to pass the test output. 4. Display level: used for music dynamic [E0 input level value jump display and adjustment output 10Hz. 20KHz gain plus and minus 31 segments Adjustment 5. Display the screen of the operation content. 6. Select the function switch button: directly press to switch the left and right states to adjust the input volume and sound, press to confirm to exit the volume value. VOL OUT is the output channel volume value adjustment. HIGH PASS is the high pass Filter (20Hz -50Hz range). LOW PASS is the low channel filter (5KHz -20KHz range) long press EQ/BYPASSI to (PASS) to pass the test output.4. Display level: used for music dynamic [E0 input level value jump display and adjustment output 10Hz. 20KHz gain plus and minus 31-segment adjustment Adjust the input volume and sound, press OK to exit the volume value. VOL OUT is the volume value adjustment of the output channel. HIGH PASS is the high-pass filter (20Hz-50Hz range). LOW PASS is the low-channel filter (5KHz)-20KHz Range) long press EQ/BYPASSI to (PASS) to pass the test output. 4. Display level: used for music dynamic [E0 input level value jump display and adjustment output 10Hz. 20KHz gain plus and minus 31-segment adjustment 5. Operation content display Screen. 6. Select the function switch button: directly press to switch the left and right states to adjust the input volume and sound, press to confirm and exit the volume value. 20KHz gain plus or minus 31-segment adjustment 5. Operation content display screen. Directly press to switch the left and right states to adjust the input volume and sound, press to confirm and exit the volume value. 20KHz gain plus and minus 31 segments adjustment volume and sound, press OK to exit the volume value.