Leicozic 10000W DSP Amplifier Subwoofer Amplificador 4 Channel GaN FIR Filter Equalizer Line Array Ampli Digital Dante 80-296V

Power Rating Of 4-Channel GaN DSP Amplifier 3 Models

GaN430

8ohm/Stereo（RMS）4*3000W

4ohm/Stereo（RMS）4*5000W

2ohm/Stereo（RMS）4*6800W

8ohm/bridge（RMS） 2*10000W

4ohm/bridge（RMS） 2*11000W

GaN420

8ohm/Stereo（RMS）4*2000W

4ohm/Stereo（RMS）4*3600W

2ohm/Stereo（RMS）4*4500W

8ohm/bridge（RMS） 2*7200W

4ohm/bridge（RMS）2*9000W

GaN413

8ohm/Stereo（RMS）4*1300W

4ohm/Stereo（RMS）4*2400W

2ohm/Stereo（RMS）4*3000W

8ohm/bridge（RMS）2*4800W

4ohm/bridge（RMS）2*6000W

Main Feature

*DSP processor module and operating software are designed and produced in Germany, with optional Dante function

*Gain,signal routing, frequency division, delay, voltage limit, FIR and other parameter debugging functions

*Adopting gallium nitride technology, high efficiency, low heat generation, reliable and durable, strong puncture resistance, clean sound, and low distortion

*Stable and reliable 2 Ω drive capability, perfect for line array speaker systems

*80V-296V wide voltage operation

*Adopting active PFC and soft switching technology, with a maximum power correction factor of 0.99

*With ROSH, CE certification, national quality inspection report, energy conservation and environmental protection certification, and can pass various 3C tests

Frequency response：20Hz-20kHz,+0/-1dB

Total harmonic distortion: <0.5%,20Hz-20kHz

Intermodulation distortion: <0.05%

Conversion rate: 50V/µs @ 8 Ω

Damping coefficient: >5000 @ 20-200Hz

Signal to noise ratio: >110dB

Crosstalk: -75dB

Gain selection:32dB/35dB/38DB/41dB

Weight and size(W*H*D): 12KG,482x44x460mm

Digital signal processor : 64 bit multimode，4INPUT 4OUTPUT

AD converter : 120db Dynamic Range

DA converter : 110db Dynamic Range

Saving presets :100

INPUT: Analog/optional Dante

Delayrange : 0-10ms

EQ :5-segment formation balance, 10 segment input/output balance

crossover filter : Linkwitz-Riley，Belssel，Butterworth

FIR filter 4x144taps

Software Parameter

Inputs:

Analog Inputs (single ended) : 4

Dynamic Range : typ. 120 dB(A)

Max. Input Level : +20 dBu

Input Impedance (single ended) : 11kΩ

Outputs

Analog Outputs : 4

Dynamic Range : typ. 110 dB(A)

Maximum Output Level (default setting) : +14
dBu

Output Level Setting (by jumper) : +8 / +14
dBu

Source Impedance : 235 / 470Ω

System

Input-to-output latency : 510µs

Gain : 0 +/- 0.5 dB

Dynamic Range (unity gain) : typ. 107 dB(A)

THD (@ 0dBu, 1kHz, unity gain) : < 0.003%

Frequency Response : 10…20k Hz +/-0.5dB

DSP :
64 bit multimode ALLDSP AM685

Number of processors : 1

Sample rate : 48khz

FIR : 4x144 taps

Presets : 100

Delay : 10ms

PEQ (each input and output) : 10bands

Grouping EQ (each input) : 5bands

Crossover (each input, LPF and HPF) : 24dB/Oct

Crossover (each output, LPF and HPF) : 48 dB/Oct

Filtered Compressors (each input and
output) : 4 bands

Limiter (switchable true RMS / Zero Attack,
each in and out) : 1 bands+H2:N33