Description:
Product Name: Bluetooth-compatible Receiver Transmitter
Interface: 3.5mm, plug and play;
Transmission rate: 4mbrs;
Working radius: 10m;
Working frequency: 2480mh2;
Chip Bluetooth-compatible: 5.0;
Operation Steps: RX switch is in receiving mode, F-X is in sending mode, insert 3.5mm audio device, switch the switch to the desired sending or receiving mode, turn on the Bluetooth-compatible product to be connected, search for Btsreaker, indicate after successful pairing and connection lights are always on.
Operation steps Note: Before switching between receiving and sending modes, it must be turned off and then turned on to switch;
Receiving mode power on and off: set the switch to RX receiving mode, press and hold the multi-function button until the red and blue lights flash alternately, enter the pairing mode; in the power-on state, long press the multi-function button, the red light is on, shutdown;
Pairing and connection: Turn on the Bluetooth-compatible device in the pairing state, search for the device name "TX-10" and pair and connect. After the connection is successful, the blue indication light will flash slowly;
Pause playback: In music playback mode, short press the multi-function button to play or pause music;
Start mode: quick flash to enter pairing mode;
Pairing connection: In the pairing state, turn on the Bluetooth-compatible receiving device for pairing and connection. After the pairing is successful, the blue indication light is on and off: turn the switch to TX transmission mode, press and hold the multi-function button until the blue indication light flashes quickly and slowly;
Music playback: insert ￠3.3mm audio input stereo audio, your Bluetooth-compatible receiver can play music
Tips:
1. If the pairing connection fails or cannot be connected for a long time, you can shut down and restart.
2. Button description, the middle button is the power on/off/pause button. +- The button to play music in receiving mode, the volume can be adjusted, and the songs can be switched up and down. Press +- at the same time to switch between Rx and TX modes;
Packing list:
2 in 1 Bluetooth-compatible transmitter and receiver x 1
charging cable x 1
3.5mm AUX audio cable x 1
user manual x 1
packing bag x 1
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.