RYRAProfessional 3.5mm Wireless Bluetoth Receiver Audio Music Adapter Bluetoth 3.0 Bluetoth Adapter Aux Receptor

Description:

3.5mm stereo input jack

Sleep mode, energy saving

Instructions:

If this is the first time you use this device, please pair the device first:

To enter pairing mode, press and hold the ON/ OFF button for 5 seconds until both red and blue LEDs flash.

The devices should now recognize each other and pair. The LED on the music receiver will slowly flash blue after successfully pairing.

To complete pairing some devices require a pass key or code, please enter "0000".

Once successfully paired, the devices can be power off. To re-connect simply power them both on,no need to pair again

If you have already matched before:

Press and hold the ON/OFF button for 3 seconds until the blue LED light begins flashing.

To turn off, press and hold the ON/ OFF button for 5 seconds. The red LED will light up, and then turn off.

Interface: Audio 3.5

Whether plug and play: plug and play

External power supply: no external power supply

Transmission rate: 300 (Mbps)

Effective working radius: 10 (m)

standard: 3.0

Operating frequency: 0.5 (MHz)

Support for handsfree calls

Support A2DP stereo

Frequency: 2.4GHz

Power: Use a mini USB cable to charge

Working hours: up to 8 hours

Specifications:

3.5mm stereo input jack

Sleep mode, energy saving

10 (m) Effective working radius

0.5 (MHz) Operating frequency

Support for handsfree calls

Support A2DP stereo

Package Included:

1 x Receiver

Notes:

Due to the difference between different monitors, the pictures may not reflect the actual color of the item.

Compare the detail sizes with yours, please allow 1-3cm error, due to manual measurement.

Please leaving a message before you give the bad feedback, if the products have some problems.

Thanks for your understandings.