Features:

Manual blowing

Double nail design

Oil removal film

water level      casing port

It is recommended 
to float up and down
 about 3cm from the 
horizontal plane.
1.Correct height of 
the installation set of had
2.Tube must be vertical

Under normal 
conditions, it is 
generally recommended
 that 2/3 of the air be 
removed from the 
groove, leaving 1/3 of 
the air behind.

Small flow (not rotating)
1. The groove is full of air, so it floats and does not enter 
the water and does not rotate, you need to use a syringe to pump 
out some of the air, so that the floating basket reduces buoyancy 
and sinks.
2, close the small inlet flow, increase suction
3. Adjust the flow rate upward through the frequency conversion 
water pump, increase the suction.

High flow (sinking)
1. Add hand valve control under the casing to reduce the water 
flow.
2. Increase the diameter of the water inlet pipe, or increase a 
water inlet
3. Adjust the flow rate downward by frequency conversion pump 
to reduce the suction.

Adjust Flow easily