TPU Ultralight Inner Tube
Material:TPU
Model Tube:700c
Compatible Tire Width:700*23~30c
Weight(g):36±5
Type:Road Bike
Valve Type:Presta Valve
Valve Length:60L/75L
Light｜Compact｜Puncture Resistant｜Anti-aging
*The inner tube is 20% lower on rolling resistance than traditional rubber inner tube, approximating to latex inner tube. Riders can pedal more easilywith higher speed and power.
As light as 36g, Around 200g weight loss to your bicycle for one pair
●Compared to the traditional rubber inner tube, the weight and size are reduced by more than 70%, making it easy to carry along.
● Cope with the unexpected on the ride with ease.
Tough enough to resist puncture
●Inherent high intensity of TPU gives this inner tube superb puncture resistance.
● One-piece production technology minimises the possibility of air leakage.
●Both material and technology are guaranteed for your safety.
Long-lasting, Anti-aging and environmentally friendly
● TPU material has characteristics like anti-aging, heat/cold resistant, anti-bacterial and anti-mould, therefore it has a long service life.
● It is also a non-toxic, non-hazardous , biodegradable and recyclable green material.
Low rolling resistance
●Through reducing the friction on the tire and the weight of the wheelset, rolling resistance is reduced without compromising abrasion resistance or slip resistance performance.
●Now set yourself a better goal with less power loss.
Warning: Do not pull hard on the inner tube or over-inflate the inner tube without installing the tire first.
Installation:
1.Start by slightly inflating the inner tube by 5psi. Be careful not to over-inflate and burst the inner tube.
2.Fit the bead of the tire into the rim, then insert the inner tube into the tire starting at the valve stem.
3.Fit the other bead of the tire into the rim and adjust the inner tube at the end, taking care not to be squeezed by the tire.4.Check the inner tube at the valve stem to make sure the inner tube is completely wrapped by the tire. If the inner tube is exposed, press the valve to have the inner tube completely in the tire, and then pull the valve out in the opposite direction to ensure the inner tube is stretched.
5.Inflate to 15 psi and pinch the tire for one round to ensure that the inner tube is fully extended in the tire.
6.Inflated to standard working air pressure and ready for use.
