Caractéristiques
Description
1Spider High Temperature Pro
High Flow Printing
Temperature Up to 300°C
No Modification Required
Fast Heat Dissipation
2Spider Speedy Ceramic Hotend
Rapid Heating
High Flow Printing
300°C High Temperature Resistance
Easy to Install
Nozzle:Hardened steel nozzle 0.4mm*1,Copper alloy nozzle 0.8mm*1
Product Size:51x22x18mm
Weight:40g
Color:Red and black
Compatiblewith Filament:PLA, ABS,PETG,TPU, PPPC,Nylon,PEEK, PEl, etc
Support Filament Diameter:01.75+0.05mm
Retraction Distance:Max 5mm(can be adjusted accordingto the printing situation)
Maximum Flow Rate:32mm3/s.
Compatible Models
Ender-3 Pro/Ender-3/Ender-3 V2/Ender-5/Ender-5 Pro/Ender-5 Plus
Ender-3s/Ender-6/Ender-4/Ender-3 Max/Ender-2 Pro/Ender-2
CR-10S CR-10/CR-10 S5/CR-10 S4/CR-10Mini/CR-20/CR-20 Pro
Applicable For :
Ender 3 Series ：Ender-3/Ender-3 S/Ender-3 Pro/Ender-3 Max/Ender-3 V2
Ender 5 Series ：Ender-5/Ender-5 Pro/Ender-5 Plus
Ender-6/Ender-4/Ender-2 Pro/Ender-2
CR Series ：CR-10S CR-10/CR-10 S5/CR-10 S4/CR-10Mini/CR-20/CR-20Pro
Spider High Temperature Pro Describe :
Spider High Temperature and High Flow Hotend Pro
High Temperature and High Flow Printing, Higher Temperature Resistant and Faster Speed.
1、High Flow Printing
2、Temperature Upto 300℃
3、No Modification Required
4、Fast Heat Dissipation
Large Melting Zone, High-flow Printing
The overall melting zone is increased by 30%
(The melting zone length is 27.3mm),Smooth printing even with 0.8mm nozzle.
All-metal Design High
Temperature Resistance
Up to 300℃
All-metal design for better overall performance Support
300℃ printing and compatible with various filaments such as PLA, ABS, PETG, TPU, PP, PC, nylon, PEEK, PEI, etc.
Standardized Interface, No Modification Required
Small and exquisite external size with modular standard interface design, ready to use without modification.
Easy installation and maintenance, compatible
Strength Upgrade, Longer lifespan
The heat break and heat sink are perfect fit to avoid pressure between them, and the strength is upgraded to extend the life of the hotend.
Structural Upgrade, Faster Heat Dissipation
The heat dissipation part adopts a split design to reduce heat transfer.
Red copper heat sink to improve heat dissipation efficiency.
Material Upgrade for Better Printing
The heat break is made of titanium and copper alloys which perfectly fit with each other, and 0.2mm thin wall thickness for excellent thermal insulation.
The heat block and nozzle are made of copper alloy, and roughness of Ra0.3 on the inner wall of the nozzle to improve print quality.
Compatible with Creality CR-10/CR-1OS/Ender-2/Ender-3/
Ender-5 series printer.
(Please refer to the following page for specific models)
Product Parameters
Nozzle:0.4mm1,0.8mm1
Size:66×22×23mm
Color:61g
Compatible with
Filament : PLA,ABS,PETC,TPU,PP,PC,PA,PEI,etc.
Support Filament
Diameter :1.75±0
.05mm
Retraction distance : Max 5mm(It can be
adjusted according to
the printing situation)
Retraction distance : 450℃(excluding
silicone sleeve)
The inner diameter of
the throat tube : 19mm
Nozzle, throat tube Ra : Ras0.25
Applicable models : Creality CR-10/CR-10S/Ender-2/Ender-3/Ender-5 series printer
Accessories list : Adaptorlpc,copper tube*lpc,thermistor*lpc, thermal grease*lpc,hexagonal wrench*3pcs, M3X20 screw*2pcs,M2 limit screw*2pcs
Spider Hotend
300℃ High Temperature Printing
Easy to install
High Strength
Fast Heat Dissipation
CREALITY Spider Hotend Pro Kit 300mm/sHigh Speed Flow Printing Temperature Up to 300°C For Ender 3/Ender-5/CR-10 Series
Color
