Description

This product has a built-in lithium battery and does not require an external power supply.
Product Manual This product is a two-in-one bluetooth-compatible product bluetooth-compatible2-in-1

1) The bluetooth-compatible music player developed and designed by our company, which integrates bluetooth-compatible receiving and transmitting, can be easily connected with bluetooth-compatible devices of digital products such as notebook computers, mobile phones, PDAs, TVs, bluetooth-compatible earphones, etc. to realize wireless transmission.

2) Operation steps: RX switch is in receive mode, FX is in transmit mode, insert a 3.5mm audio device, switch the switch to the transmit or receive mode you need, turn on the bluetooth-compatible product you want to connect, search for Btsreaker, and after successful pairing and connection The light is always on.

3) Product parameters; neutral, interface: 3.5mm, plug and play, transmission rate 4mbrs, working radius 10m, working frequency 2480mh2. Chip bluetooth-compatible 5.0 specification, built-in lithium battery, no external power supply required.

Operation steps (Note: Before switching between receiving and transmitting modes, it must be turned off and then turned on to switch)

Receive mode:

1) Power on and off: Set the switch to RX receiving mode, and press and hold the multi-function button until the red and blue lights flash alternately to enter the pairing mode; in the power-on state, long press the multi-function button to light up the red light to shut down;
2) Pairing connection: Turn on your bluetooth-compatible device in the pairing state, search for the device name "TX-10" and pair it to connect, the blue light flashes slowly after the connection is successful;
3) Pause playback: in music playback mode, short press the multi-function key to play or pause the music;

Launch Mode:
1) Quick flash to enter pairing mode;
2) Pairing connection: in the pairing state, turn on your bluetooth-compatible receiving device for pairing and connection. After the pairing is successful, the blue light turns on and off: turn the switch to TX transmission mode, and press and hold the multi-function button until the blue light flashes quickly and slowly;
3) Music playback: insert ￠3.3mm audio input stereo audio, your bluetooth-compatible receiver can play music

Kind tips:

1. If the pairing connection fails or cannot be connected for a long time, you can shut down and restart.
2. Button description, the middle button is the power on/off/pause button. + - Button to play music in receiving mode, the volume can be adjusted, and the song can be switched up and down. Press + - at the same time to switch between Rx TX mode

Package Included:

1* 2 in 1 Bluetooth-compatible Transmitter&Receiver
1* Charging Cable
1* 3.5mm AUX Audio Cable
1* User Manual